Introducing our latest creation, the all-new MG-X Dual Layer Rear Tailgate Table - to fit both JB74 and JC74 XL Suzuki Jimny’s!
December 25' Update: Our new Ver 2.0 batch of these tables will feature a slightly thinner gauge of metal to keep weight down. Our new version 2 design uses 1.5mm thickness steel instead of 2mm, which drops the weight from 15.1kg down to 11.4kg - which is a saving of 3.7kg overall. Available from January 2026.
Our team has worked hard to include some super cool features to ensure we’ve made the ultimate Jimny Tailgate table.
- Dual Layered - Keep clutter down & off your cooking space with a separate upper level - perfect for holding drinks, condiments & lightweight goods. This level can also be opened even with the lower shelf stowed away!
- Both top and bottom layers have 3 levels of adjustment, making sure that your table will always be levelled out properly.
- String-free design - Unlike other tables on the market, our table does not use any sort of string/elastic system to hold the tables down or up. Our hinge system is made entirely from metal.
- Heavy Duty - Made entirely from Zinc Plated Mild Steel and then powder coated - It’ll safely carry static weight of up to 50kg.
- ZERO Rattles - We've utilised nylon washers, torque nuts, tightening knobs & levers as well as strong neodymium magnets to ensure you’re not bothered by any metal rattling on the road.
- Integrated MOLLE Panel with an open top - designed to be used as a pocket as well for storing things like books, camping gear etc.
- Fully Australian made using local products and steel.
- Integrated bottle opener cut out.
Info & Specs:
- Version 1 (2mm thick steel) Total fitted weight: Approx. 15.1kg including all fasteners.
- New Version 2 (1.5mm thick steel with a 3mm aluminium backing panel) Total fitted weight: 11.4kg including all fasteners.
- Drilling into your tailgate is required for fitment of the supplied M6 rivnuts. (You'll need to make some existing hole slightly larger. NO new holes are drilled.)
- Tools needed: 9mm Drill bit with drill, 10mm socket and ratchet, rivnut tool & paint or primer.
- Total depth between backing plate and outside of MOLLE Panel - 60mm.
Please note:
The factory 3 door Jimny plastic storage compartment cannot be used with this table.
Due to the extra added weight after fitment onto your Jimny's tailgate, care should always be taken when opening your tailgate to ensure no damage is done to the rear door strut. It is not advised to let the door swing open at full force, as the extra weight could cause the tailgate strut to break.
MG-X Dual Layer Tailgate Drop Down Table (JB74/JC74 Jimny)