Introducing our latest creation - the brand new MG-X Base Deck Platform with Integrated Storage System.
ETA on our first batch is approx. start of February 2026. If you'd like to place a pre-order, please contact us.
Over the years we've found that installing a false floor is one of the most common mods Suzuki Jimny owners do, as often times the rear seats aren't always needed and are swapped out to a platform deck to accommodate things like fridges, camping gear etc.
Current base deck platforms do the job, but there is plenty of wasted space under their platforms which could be utilised much better - that's where we stepped in.
Fully designed in house, we've put a lot of thought into making the most ultimate and versatile Jimny platform/base deck in the world, offering hidden underfloor storage like no other base deck platform currently available on the market, which means more storage space and much less clutter on the inside of your Jimny.
Rear Under Floor Storage:
Both sides of our rear platform decks feature a bespoke built in hinge system, allowing either side of the platform to be independently raised up from the rear - giving way to plenty of underfloor storage. These platforms are then secured down with four strong 44mm rubber coated neodymium magnets (11.5kg of pull force each) which means there is no bulky/clanky locking mechanism to rattle or poke through the top carpeted area.
There is a also a large bolt in tray which has been designed to run as close to the Jimny's metal body as possible. This keeps everything contained and the floor of your Jimny completely scratch free. This tray has cut-outs for the factory seat retaining mounts, which could be used as tie down points if necessary. You can also easily mount parts like lithium batteries, 12v DC battery chargers or air compressors to this tray.
Front Storage Compartment:
We've also managed to utilise the spare space at the front of the platform as well, which features a completely separate storage compartment, perfect for smaller objects. This area is closed off by a hinged swinging door that is held up by two of the same 44mm rubber coated neodymium magnets that we've used on the rear.
Features and Specs:
- Shipped product weight: 32kg
- Total added weight once seats are removed: 18.3kg
- Rear under floor storage dimensions: 92cm wide x 50cm long x 13-17cm high
- Front storage compartment dimensions: 92cm wide x 10.5cm deep x 13cm high
- Made entirely from Steel with 15mm thick laminated Plywood - 300kg load rating
- Absolutely ZERO rattles
- No modifications, cutting or drilling needed - completely bolt in and removable
- Rear Inner divider can be removed if needed
- Full access to the factory jack
- Includes all fasteners, fitting brackets and instructions
Please note:
- Will only fit the JB74 3 door Jimny (5 Door Jimny owners, we're making one for you too!)
- Rear seats will need to be removed for installation
- Installation time is roughly 1-2 hours - Tools required: 14mm and 13mm Spanner, Allan key, 10mm Ratchet and socket.